dual_sport_dork@lemmy.world to 3DPrinting@lemmy.worldEnglish · 23 days agoAlternative Printer Useslemmy.worldimagemessage-square54fedilinkarrow-up1290arrow-down16file-text
arrow-up1284arrow-down1imageAlternative Printer Useslemmy.worlddual_sport_dork@lemmy.world to 3DPrinting@lemmy.worldEnglish · 23 days agomessage-square54fedilinkfile-text
“You need to buy this special heater pad to break the screen adhesive!” No, I think you will find that in fact I don’t.
minus-squareumbrella@lemmy.mllinkfedilinkEnglisharrow-up6arrow-down2·edit-223 days agoglad to hear from the 3d printed sex toy experts in the house wont the layers transfer to the silicone?
minus-squareFuglyDuck@lemmy.worldlinkfedilinkEnglisharrow-up9arrow-down1·23 days agoYou can process the inside to be smooth (sanding, priming. If you have a solvent - acetone for abs, as an example. And mold release.) Even just using a filler/primer should be enough
minus-squarenilloc@discuss.tchncs.delinkfedilinkEnglisharrow-up5·22 days agoAren’t ribs a good thing sometimes?
glad to hear from the 3d printed sex toy experts in the house
wont the layers transfer to the silicone?
You can process the inside to be smooth (sanding, priming. If you have a solvent - acetone for abs, as an example. And mold release.)
Even just using a filler/primer should be enough
Aren’t ribs a good thing sometimes?