dual_sport_dork@lemmy.world to 3DPrinting@lemmy.worldEnglish · 23 days agoAlternative Printer Useslemmy.worldimagemessage-square54fedilinkarrow-up1290arrow-down16file-text
arrow-up1284arrow-down1imageAlternative Printer Useslemmy.worlddual_sport_dork@lemmy.world to 3DPrinting@lemmy.worldEnglish · 23 days agomessage-square54fedilinkfile-text
“You need to buy this special heater pad to break the screen adhesive!” No, I think you will find that in fact I don’t.
minus-squareFuglyDuck@lemmy.worldlinkfedilinkEnglisharrow-up9arrow-down1·23 days agoYou can process the inside to be smooth (sanding, priming. If you have a solvent - acetone for abs, as an example. And mold release.) Even just using a filler/primer should be enough
You can process the inside to be smooth (sanding, priming. If you have a solvent - acetone for abs, as an example. And mold release.)
Even just using a filler/primer should be enough