Sopuli lover

My interests are mainly music, instruments, tech, Linux and self hosting.

  • 1 Post
  • 33 Comments
Joined 1 year ago
cake
Cake day: June 11th, 2023

help-circle


  • As a photographer I’m a bit torn on this one.

    I believe AI art should definitely be labeled to minimize people being mislead about the source of the art. But at the same time the OP on the Adobe forums post did say they used it as any other tool for touching up and fixing inconsistencies.

    If I were to for example arrange a photoshoot with a model and they happened to have a zit that day on their forehead of course I’m gonna edit that out. Or if I happened to have an assistant with me that got in the shot but I don’t want to crop in making the background and feel of the photo tighter I would gladly remove that too. Sure Adobe already has the patch, clone and even magic eraser tool (Which also uses AI, that might or might not mark photos) to do these fix-ups but if I can use AI, that I hope is trained on data they’re actually allowed to train on, I think I would prefer that because if I’m gonna spend 10 to 30 minutes fixing blemishes, zits and what not I’d much prefer to use the AI tools to get my job done quicker.

    If the tools were however used to rigorously change, modify and edit the scene and subject then for sure, it might be best to add that.

    Wouldn’t it be better to not discourage the use of editing tools when those tools are used in a way that just makes one’s job quicker? If I were to use Lightrooms subject quick selection, should it be slapped on then? Or if I were to use an editing preset created with AI that automatically adjusts the basic settings of an image and further my editing from that, should the label be created then? Or if I have a flat white background with some tapestry pattern and don’t want to spend hours getting the alignment of the pattern just right as I try to fix a minor aspect ratio issue or want to get just a bit more breathing room on the subject and I use the mentioned AI tool in the OP.

    Things OP mentioned in his post and the scenarios I mentioned are all things you can do without AI anyways it just takes a lot longer sometimes, there’s no cheating in using the right tool for the right job IMO. I don’t think it’s too far off from someone who makes sculptures in clay uses an ice scream scoop with ridges to create texture or a Dremel to touch up and fix corners. Or a painter using different tools and brushes and scrapers to finish their painting.

    Perhaps a better idea would be if we want to make the labels “fair” there should also be a label that the photo has been manipulated by a program in general or maybe add a percentage indicator to see how much of it has been edited specifically with AI. Slapping an “AI” label on someone because they decided to get equal results by using another tool to do normal touch-ups to a photo could potentially be damaging to ones career and credibility when it doesn’t say how much of it was AI or in what reach, because now there’s the chance someone might be looking for their next wedding photographer and be discouraged because of the bad rep regarding AI.




  • I started playing recorder in 2018 and have been practicing ever since, bought a couple different instruments after that and it’s been great. I joined a recorder ensemble too and we do local plays every now and then!

    Since I started learning I learnt the alt recorder and tenor recorder too. Then I had a ukulele laying about I started to learn as well. I also bought a trumpet but learning that has been slow, I also got a Venova, kalimba, accordion and melodica laying about that I play on occasionally.

    I think it’s a mix of finding the right instrument and inspiration to get a goal of. The only reason I started practicing recorder was because of this meme from VRChat




  • While I love Bazzite and have been using it as my primary OS on my only computer which is a Steam Deck, I’m not sure I can agree that a non-tinkerer should go with it. I’d probably follow along the Linux Mint train honestly. It’s an honest project with their heart in the right place and makes usability a breeze and with a wider community than rpm-ostree based Fedora it’s probably gonna be more minor issues and annoyances in the long run.


  • I find your point interesting and I agree to some extent.

    When I have people around me that express some type of radical view I usually casually mention a slight disagreement or let it slide because I know going into a debate with me won’t really change much.

    However expressing opinions and feelings that are inherently based on hatred or lack of understanding, at least from what history has told, will lead to them being acted upon. Having resenting opinions about LGBT, for example, and grouping up with people with that mindset will probably spiral it into more lack of understanding and stronger opinions against it. Eventually leading to a growing and potentially spreading resentment against it. This extends to religion, skin colour, countries, mental diagnoses or anything else really.

    What the “core” is so to speak is about things that people can’t inherently control, being born differently, being born in a certain place, etc.



  • I grew up with the cheapest and most worn down vacuum cleaners. It was awful, everything from having to pull it out of a cabinet to finding an outlet and, having bad suction, awful cleaning heads and annoying hoses.

    So when I got my own apartment and worked for a bit I decided to go all in on a Dyson Absolute V12 Detect. It’s actually very painless and super quick to vacuum now. Also a bit fun.

    With a rechargeable battery it’s wireless and the battery lasts me about 4 vacuuming sessions in my apartment, no keeping track of vacuum bags and filters. All in all it takes me from touching my vacuum to being done cleaning my, albeit 1 room apartment, about 10 minutes. It’s great!


  • I’m thinking it’ll probably be way better for sustainability as well. Since I do need the performance I do and the Deck hits that performance within a good margin having to spend €12000 on a laptop with good build quality and good specs just for it to break or have some shit happen to it after the warranty is out feels like shit. So I’m thinking because the setup is semi-modular and each of the part of the setup isn’t super expensive it can still be worth it in the long-ish run. My steam deck break? I buy a new part from ifixit. The monitor breaks? Worst case scenario I can get a new one and possibly an upgrade since this market is new and moving. Keyboard and mouse breaks? Easy to replace that too.

    Downside of course being the clunkiness of having to carry around all that and the time spent setting it up rather than just getting the laptop up and fold it up.


  • Something along the lines of 2K or more with at least good colour accuracy would suffice for me! It’s all I need for the photo editing part. Having plugged it into my 4K TV it went very well. All the UI elements and such displayed perfectly and smoothly for the most part. So 4K on the Steam Deck is most definitely doable! At least if you disregard gaming that is which isn’t the main goal for this project.

    Does your steam deck output to 8K when you plug it into the TV? How are UI elements and FPS on that resolution for you? Would be fun to see where the limit would be.


  • This has been my primary concern with getting this to work as well. If I do decide to go with the portable monitor which I’m leaning more towards now it’ll for sure be a bit more clunky to get out the monitor, plug in the steam deck, pull out a mouse and keyboard and make sure their paired and then get going. Our trains here are very spacious most of the time unless it gets crowded so for the most part that itself wouldn’t be too big of an issue but depends on how much effort I feel needs to go into getting everything setup for my usual 40 minute train ride to get a few write-ups on my assignment done. Realistically I would probably skip the monitor and get the keyboard out and use the touchscreen thinking about it.


  • That seems to be the gist for most of the portable displays and lapdocks available. I know there’s a few portable displays that can charge the Steam Deck properly but they’re usually far between. I’m slightly put off from getting 1080p since it’s been a very long time since I settled with that resolution and to me just feels slightly too little. Especially when I’m gonna edit photos and browser the web. I’m gonna check around a bit for 4K portable monitors since there doesn’t seem to be any brand ones that are 2K.


  • Bazzite seems very interesting. Thanks for the link! HDR to me is a bit of a second priority, it sure is nice but it doesn’t make and break anything. Currently trying out Windows on the Deck and seems like HDR seems to be broken for me there. Sadly the option on my TV to fix it seems to be greyed out in the settings.

    My desktop experience so far has been great actually. While the CPU itself isn’t as strong as my previous 5900HX the GPU performance is indeed noticeable when running about in some software. It’s a great try-out at least!


  • And as someone whose been distro-hopping for 10 years and tried loads of different setups it’s been my personal conclusion :)

    In the end the browser isn’t everything, it’s also UI of the desktop environment and the file explorer and how some things are handled. That I find more comfortable with Windows, but when I manage my servers I love using Linux and when I need to do web-dev stuff too.



  • I don’t intend to do any gaming on an external monitor I think. Even if I do I think I’ll be happy enough with FSR!

    You don’t seem to be alone in disliking the build quality of the NexDock. I wish more people had input to the UPerfect devices but their displays seem good. I’ve heard of more “proper” display brands doing some portable displays too that I can look into to get a bit more reliable warranty and such.

    Have you found yourself preferring using an external keyboard and mouse with the NexDock? That would probably be the biggest downside to the solution of using the monitor only solution. Having to chuck with me a Bluetooth KB+M.

    I’m glad for your input tho, helps a ton!