Not alone there. Still humpin a couple systems with those. Still runs SWBF2 so im good

This just feeds into my fear that the current internet is going to die at the hands of corpos. As a result, my paranoid ass has been buying up modems in the event we need to start from scratch.

Dead kennedys:

https://youtu.be/amTAIjhUjDk?si=qfjvkyGwlgFXoEqs

I mixed these up as a kid once. Worst jug of kool-aid i ever had. Fruit punch “sweetened” with salt.

So the price will go down… right?

And dont get me started on the oaks.

Im just curious. Is it a Goldwing? Maybe an electraglide. If its bigger than those i would be very curious. I live in the SW, so i ride routinely. I agree with the view. Its nice being up higher (r1200gs), though as of late i am grateful my fuel economy is a bit better at 40 ( its also a 2007, so older ). Being on a bike leaves you more exposed, but i kinda feel safer. Like you mention, we have space in a lane, we can maneuver into, and out of, places cars cant. When we do hit, its worse, but with good driving habits you can do a lot more on a bike. Meh, could be i just really live my bike and have become biased.

I have been making parts for my FIL’s 61 Ranchero. I have made almost every gasket, the heating couplers, and dash knobs.

Did you see that ludicrous display last night?

Elon is trying to get the Crest from Birdmans Helmet.

Almost a throw away line, but in the original Red Dawn the invading commander issues orders to seize govt records on gun holders as a target.

I would reference a Print Defect guide, such as the following:

https://all3dp.com/1/common-3d-printing-problems-troubleshooting-3d-printer-issues/#section-fdm-3d-printing-problems-my-print-looks-bad

Perhaps the section for “Some Layers Are Missing”

The absence of material leads me to an under-extrusion, though that could be influenced by a few things.

Your reported temps are fine, looks like bed adhesion is ok. So if there is an absence, the plastic didnt make it there. You have to ask why. Is it a restriction (resistance in the movement of the filament), filament defect (water content), extruder issue (nozzle), cascading first layer issue (clogged nozzle/z-cal).