I never stated I don’t personally agree with the premise
caused some controversy from what I’ve seen
If you look up “Capitalism is good Sabine” on Youtube you’ll see all the videos I was referring to. I was actually giving the original video the “benefit of the doubt” versus how many counter videos were out there.
While all of that is true, I don’t feel like that’s a stance I wish to take. How do you bridge that gap so that other’s can come out of that space? Berating a child for their beliefs does little in the long run if they have an echo chamber they can retreat to. I completely understand if that’s not your concern and you would rather not waste the time with science deniers, it can be dangerous and frustrating as you’ve stated.
Very true, any recommendations that you enjoy? For the most part as I stated it’s useful for certain topics that come up when someone’s discussing some woowoo, it’s hard for them to sit down and go through a whole course when the context of what they’re discussing doesn’t come up. There’s also the problem of being slightly educated in a topic but then falling down a rabbit hole thinking it’s all legit (quantum subject matter seems to be particularly susceptible).
I’ve watched that channel in the past, been meaning to check out that latest “capitalism is good” video that’s hit my feed and caused some controversy from what I’ve seen. I’m hoping there’s just context that’s being missed and the video is actually decent.
I’ve been suspecting this is one of those “do 200% horrible damages but increases revenue (or at least make the company seem more profitable)” then have a “management change” that comes in as the savoir but they only roll back 10% of the changes to show they’ve fixed things.
Had to look it up for curiosity’s sake.
In order to get fully set up, you will need to pay a $100.00 fee for each product you wish to distribute on Steam (the “Steam Direct Fee”)… This fee is not refundable, but will be recoupable in the payment made after your product has at least $1,000.00 Adjusted Gross Revenue for Steam Store and in-app purchases. Steamworks Partner Program
While not free, seems to be no overhead for the length of stay on Steam that I can see. Another site includes some more description which might add to the cost though
The cost to put a game on Steam depends on the type of game, the development budget [1], and the business model. To get a game onto Steam, developers need to pay a one-time registration fee of $100. After that, they will need to pay a 30% royalty fee. Additionally, developers may need to pay for marketing and other costs associated with the release of their game. source
Regardless, it’s just another unfortunate case of physical copies/backups>subscriptions or “licensing/rent” deals.
Be still my heart, apparently it matters because you’ve lost all words and have gone the typical route of insults. I hope that’s how you learn and are happy, to think you actually had any factual knowledge to have a conversation with is my fault. This replies screams of something you’re dying to tell yourself in a mirror, you’re not even pointing out what I need to admit to so I’m assuming it’s a message to yourself. Have fun crying in your shed and make sure to clean your basin often, you can think of me next time you’re out there.
You’re really latching onto that sometimes bit hard aren’t you?
the context of this post is about upvoting incorrect information, and downvoting correct information.
…information about… come on… you almost got it. I’m glad you learned about catch basins, unfortunate that you believe it negates any water run-off. You do have an outlet from the basin right? Is this a magical abyss of a basin that catches all the run off from your 3k sq ft structures and you think it’ll never fill up?
I see you’re already engaging with the OP and admitted to having horrible reading comprehension since you couldn’t discern the original intent of the post. But then you continue on with the SoMEtIMEs!! rhetoric. As you’ve stated, you’re a niche land owner who is ACTIVELY adding on to an already oversized shed, your land wasn’t originally developed that way nor is that a practice that’s done without an active home owner who has stated those needs to the builders. No one is going around developing 60%, sOmETiMeS! people add on as is their right after purchasing. Love your use of picking and choosing through the argument, truly impressive.
Nice to see you showing your ass on a pedantic post like this.
outside of niche hobbyists or being used for work related activities/storage is nonsense
oh look, you fit the exact description I referred to! The context of this conversation is about a mass land development, try to fucking think about it.
No, not adding a shed, extending my garage/shop… perfect concrete with a drain.
perfect concrete?.. you do know a drain has to lead somewhere right? Into the surrounding area which if it was all developed like you’ve done would cause problems. “Slapping” refers to adding on or new but I see I hit a nerve talking about your “bestest shed”. Would be interesting to see the videos but I try not to support creators who are assholes and your descriptive reply does nothing for the conversation. Again, you’re helping prove the point that a few anecdotal observations isn’t the norm or recommended but seems to get upvotes. Continue arguing on though, love to see the hot gas pouring out of more than a hawt dog furnace.
unless you don’t consider steel frame buildings and pole sheds, but why wouldn’t you?
You do not, in fact, count those buildings towards your houses square footage. Doing so would open yourself up to all sorts of liability.
Covered, enclosed porches can only be included if heated and using the same system as the rest of the house. Garages, pool houses, guest houses, or any rooms that require you to leave the finished area of the main house to gain access are not counted in the square footage of a house. source
The only common situations in which the exact size of a home may be legally important would be:
For further considerations of those that are interested (ANSI Draft, figure 1, page 6, outside source as the real ansi website is just atrocious to navigate and I’m not gonna dox myself by loading up local code.)
As shown, the upper-level plan has an open foyer and a protruding window that does not extend to the floor; neither area contributes to the square footage of the upper level. The calculated finished square footage of the entry level does not include the protruding fireplace, covered patio, garage, or unfinished laundry. The finished area of the basement is counted toward the below- grade finished square footage in its entirety, including the area under the stairs that descend from the entry level. The area of the unfinished utility room is calculated by using the method prescribed in the standard but is not included in the below-grade finished square footage.
All that aside, you’re slapping a 25’x52’ shed onto your 1/4 acre property? That’s almost 20% of your land use not including lot encroachment setback, drainage, and basic driveway/building infrastructure. It’s your property so definitely do as you wish, but to think this is a common practice or a desirable thing outside of niche hobbyists or being used for work related activities/storage is nonsense. Neighborhood flooding, no natural green spaces for habitats, it all sounds like a horrible dystopia on your mini-compound.
The 3 that stand out the most for me thinking back on it
Typer Shark and Mud’s (typing skills)
Really helped me get down my typing skills which translates to a lot of pc based games (even just chat). Mud’s were some of my favorite fast paced games (multi-user dungeons). Godwar’s was my shtick and as a Drow character you had a lot of powers you had to get out before an opponent could notice and respond to your presence.
MechWarrior: Sega Genesis (team work skills)
This was a crazy one I would play with family. There was a co-op mode that allowed one person to control the bottom half while the other person controlled the top half of your mech. You really had to cooperate and work together so it didn’t turn into an actual physical brawl because of the frustrations.
Call of Duty: Zombies (game mechanics)
This was probably my first game that I really got into game/enemy mechanics. To survive to higher rounds you had to adapt and know what the zombies were gonna do. Later iterations kinda destroyed that feature with zombies stumbling and etc but I get they were trying to stay innovative and fresh, still killed the genre for me though.
Honorable mentions are the great RTS’s that were everywhere in the 90’s. Starcraft for sure but even blizzards previous Warcraft’s and then of course C&C and even Dune (another sega game but solid RTS for it’s time). Really though the skills for RTS’s don’t translate as direct to other games anymore (just got me better at the RTS’s that I love) as more and more they become hero focused like what they did with WC3.
edit: grammar
Can you recommend any good soldering gear for an intermediate level? I’ve done plenty of soldering over the years but have always used crappy low end products. It’s always been a struggle to properly do a clean-true solder (not just heating the solder like I see everywhere) even though I try to meticulously maintain my equipment. I’m hoping that it’s just the equipment I use and a higher end one will make things a breeze like I see the professional’s use.
It’s really a pain in my ass. On top of maintaining the equipment I have whole setups I’ve constructed to hold wires and equipment snugly so I can properly apply heat. I purchased a high temp kit but it’s cheap as well and still sometimes run into the same problem, with the smaller components and projects though I’m afraid to use it and overheat something that can’t handle it.
It would explain my dentist. Definitely an expensive hobby with what I get charged.
I’ve just recently ran into a new company advertising besides slot lights and it made the movie unwatchable. Slot lights will usually throw in 2-3 ad breaks which really annoy me because the audio levels are always pumped way up and it breaks the immersion in the narrative, followed with scattered smaller banner ads littered throughout the run time.
This new company slapped a huge banner ad that takes up 1/3 of the screen that’s present during the entire run time. Just insane when it comes to marketing because I can’t even remember the company and made me switch off. VPN + torrent will be a blessing when I can find better versions and get off these streaming sites that just carry them.
I saw someone else on another post the same, the piped videos have been working for me. I am on firefox desktop though not mobile or through a 3rd party app if that makes a difference.
I don’t wear headsets but I have a similar shape (not sure if it’s as pronounced since I haven’t shaved it like that). The article goes onto explain that it takes near 300lbs of pressure to dent the skull and if anything it’s just soft tissue/fat being weird, which can go away through massage and giving it a break lol.
I guess if you’re wearing something as tight as a belt it might make the fat form around differently. I’m skeptical though, I just don’t know what kind of devices these guys are specifically wearing and the weight/time duration so I guess anything is possible.
Eventually they might be concerned with our mental well being and find simple tasks we can do to keep ourselves busy. To make it more efficient they could construct indoor spaces where we can be with other pet-humans doing tasks until they’re ready for us to return to our cages.
and yet every single online grocery shopping I’ve been on refuses to have a filter or sort by price per weight option. It’s even more incredibly infuriating when you have to click into an item’s description or calculate it yourself, extra bonus hell points to the sites that change the weight metric so it’s an extra step to figure out what the actual comparison is (probably more a US problem with ounce/pound conversion).
Hail of a good pun line going on.
Anything from Mischief Theatre! They have their “Peter Pan Goes Wrong” for free on youtube atm.