The switch to USB-C is good! Except for all the dongles you’ll need to get there.

    • vzq@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      14
      arrow-down
      1
      ·
      10 months ago

      The main predictor of cable wear is whether people are using the phone while the cable is attached.

      If you just leave it to charge they will last for u years. If you continue to use them while they are charging, life span of the cable is measured in weeks.

        • LifeInOregon@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          10 months ago

          The material on the cable gets bent and twisted more while you’re using the phone. The wire is warmer while current is running through it (even if not immediately perceptible) and the material Apple uses (which they switched to for environmental reasons) is more brittle as it warms up. Combine the flexing and twisting with the heated state and the cable is more prone to breaking.

          • Fisch@lemmy.ml
            link
            fedilink
            English
            arrow-up
            1
            ·
            10 months ago

            But even if you’re not using it, the power adapter will still push the same wattage, no? I mean, why wouldn’t it?

            • LifeInOregon@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              10 months ago

              Correct, but using it, or not, the cable heats up. It’s only when using it that the cable is put under additional strains and stresses. Often times people rest the cable on their palm, bending it at odd angles, not intentionally but absentmindedly. These are stresses on the cable that wouldn’t exist if it were simply sitting and charging. The usage doesn’t draw more power, it just increases the likelihood of miss handling the cable. Now, if a cable is built out of materials that are less biodegradable, or contains certain chemicals that are bad for the environment, they are less likely to break down under similar circumstances. It’s kind of a catch 22. You can make cables that do not contain harmful chemicals, but breakdown easily, or you can make cables that don’t break down easily, but potentially contain harmful chemicals. The real issue is, no matter what, e-waste is being created with disposable cables.

              I don’t use my phone while plugged in (mostly because my battery life and usage habits don’t require it), and actually don’t typically plug in at all because I charge wirelessly overnight. But I do have an every pack-in lightning cable I’ve received with an iPhone since they started using lightning, and none of them are broken.

        • stown@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          10 months ago

          Have you ever bent a paperclip back and forth until it broke? Same concept.

    • Astroturfed@lemmy.world
      link
      fedilink
      English
      arrow-up
      11
      arrow-down
      1
      ·
      10 months ago

      I’ve had several fall apart from usual wear and tear. If you roll them up, pack them, run them on things, pull them in and out of bags/pockets etc they wear down pretty quickly compared to even mid range aftermarket cables. I have some nice baided cables Ive had for 10+ years. I can’t imagine and apple one lasting that. Unless it just sits plugged into an outlet all the time, any cable last forever like that.