I used sink plungers in toilets pretty much my whole life until i scrolled across a similar diagram one day and discovered the truth.

    • Psythik@lemmy.world
      link
      fedilink
      arrow-up
      10
      arrow-down
      2
      ·
      edit-2
      21 days ago

      Which brings up a good point; why would anyone need a plunger for a sink? If it gets clogged, nothing will help you short of a drain snake. And if your kitchen sink is getting clogged, it’s time to invest in a garbage disposal.

      • Soggy@lemmy.world
        link
        fedilink
        English
        arrow-up
        15
        ·
        21 days ago

        Plungers certainly do help with sinks. Loosens up a partial clog easily in my experience.

        • AA5B@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          edit-2
          20 days ago

          So weird. It always seems to pump air through the overflow and do no good. By the time you figure out how to plug the overflow, you might as well have taken off the trap and emptied it in the trash …… especially with PVC traps where it all just comes apart without tools

          • Soggy@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            20 days ago

            I just put my hand over the hole, takes two seconds. And I don’t have to clear out under the sink and get a bucket. (And it’s only very rarely necessary)

      • gnu@lemmy.zip
        link
        fedilink
        arrow-up
        4
        ·
        edit-2
        20 days ago

        I’ve found a plunger useful for a sink occasionally, a bit of back and forth plunging can loosen up a hairball or break a layer of fat/soap scum. On the other hand I’ve never needed to use a plunger on a toilet - I don’t know how much of this is exaggeration on the internet but Australian toilets don’t seem to have anywhere near the amount of issues the American designs do.