I think that installation was originally 18.04 and I installed it when it was released. A while ago anyways and I’ve been upgrading it as new versions roll out and with the latest upgrade and snapd software it has become more and more annoying to keep the operating system happy and out of my way so I can do whatever I need to do on the computer.

Snap updates have been annoying and they randomly (and temporarily) broke stuff while some update process was running on background, but as whole reinstallation is a pain in the rear I have just swallowed the annoyance and kept the thing running.

But now today, when I planned that I’d spend the day with paperwork and other “administrative” things I’ve been pushing off due to life being busy, I booted the computer and primary monitor was dead, secondary has resolution of something like 1024x768, nvidia drivers are absent and usability in general just isn’t there.

After couple of swear words I thought that ok, I’ll fix this, I’ll install all the updates and make the system happy again. But no. That’s not going to happen, at least not very easily.

I’m running LUKS encryption and thus I have a separate boot -partition. 700MB of it. I don’t remember if installer recommended that or if I just threw some reasonable sounding amount on the installer. No matter where that originally came from, it should be enough (this other ubuntu I’m writing this with has 157MB stored on /boot). I removed older kernels, but still the installer claims that I need at least 480MB (or something like that) free space on /boot, but the single kernel image, initrd and whatever crap it includes consumes 280MB (or so). So apt just fails on upgrade as it can’t generate new initrd or whatever it tries to do.

So I grabbed my ventoy-drive, downloaded latest mint ISO on it and instead of doing something productive I planned to do I’ll spend couple of hours at reinstalling the whole system. It’ll be quite a while before I install ubuntu on anything.

And it’s not just this one broken update, like I mentioned I’ve had a lot of issues with the setup and at least majority of them is caused by ubuntu and it’s package management. This was just a tipping point to finally leave that abusive relationship with my tool and set it up so that I can actually use it instead of figuring out what’s broken now and next.

  • dino@discuss.tchncs.deEnglish
    51·
    1 year ago

    People think “updates are time consuming” therefore prefer LTS because its supported for longer. I parole for quite some time that LTS has no place for private use and rolling release is the right way.

    • IsoKiero@sopuli.xyzOPEnglish
      2·
      1 year ago

      I haven’t been paying attention on the rolling releases scene, but I’m pretty sure there was no mature option back when I installed that thing in 2019 or so other than Debian Sid (and daily driving that used to be an adventure in itself, but it’s been years since I last had a system like that). With ubuntu since at least version 14 upgrading from stable release to another was pretty stable experience, but that’s not the experience I’m having today.

      • taladar@sh.itjust.works
        2·
        1 year ago

        Debian sid is not a distro, it is a staging area for Debian testing. It is not meant for use other than testing new packages.

        • IsoKiero@sopuli.xyzOPEnglish
          1·
          1 year ago

          But regardless of that you can still daily drive it as your distribution and many do. That’s why I said it’s an adventure of it’s own, but if you know what you’re getting into and accept the reality with Sid it can work. Personally I don’t want to use it at this point in my life, but I used to run it for several years when woody was getting a bit old on packages and sarge wasn’t out yet (and I think I just continued with sid after sarge release).

      • dino@discuss.tchncs.deEnglish
        2·
        1 year ago

        Iam using Tumbleweed for close to 10 years now and it was pretty mature from the start. You can’t go wrong with rolling release + perfectly configured btrfs + snapper by default.

    • nottheengineer@feddit.de
      1·
      1 year ago

      LTS does have a place on the desktop: Learning how to daily drive linux. I started with kubuntu non-LTS and didn’t know you needed to manually start a full-upgrade to not get moved to backport repos. Of course that came crashing down on me at the worst time and I took a break from linux. But I did learn enough that I can use arch now and it’s been great.

      • dino@discuss.tchncs.deEnglish
        2·
        1 year ago

        I don’t understand what it means to "not get moved to backport repos, but this seems ubuntu specific. What you need is proper rollback/snapshot mechanisms in place. Looking at Tumbleweed which offers it out of the box. For Arch you can set it up yourself or use something community made like EndeavourOS.

        LTS has no place on personal desktops.

    • FOSS Is Fun@lemmy.mlEnglish
      1·
      1 year ago

      I can’t stand rolling releases (for personal use) and I never recommend them to anyone. To me it feels like being in drift sand.

      I need fixed releases to test my documentation (shell scripts) against something. With a rolling release those scripts can break at any time, unless you read the changelog of every package update.

      But I also want and use fully automatic updates, so reading changelogs for every update would be the direct opposite of what I am looking for in an OS. I am ok with reading release notes every couple of months for a distribution upgrade though.

      I want my systems to be reproducible and that’s impossible with drift sand rolling releases. In my opinion Fedora or Ubuntu have a decent release cycle, I would never consider Arch or Tumbleweed or Solus.

      • dino@discuss.tchncs.deEnglish
        1·
        1 year ago

        Uhm you never actually used a rolling release distro obviously. Why would you have to read change logs? Also what are you referring to with “test my documentation (shell scripts)”? Why would those not work if package xyz is updated? You are not making much sense, but maybe I am lacking the experience in UNIX to understand your point of view.

        Your package manager should tell you about conflicts and even if it doesn’t and something is not working like it did before, you do a simple snapshot rollback and wait another week to update or actually read what might cause the issue. And those incidents are like super rare, at least on Opensuse Tumbleweed (e.g. 2-3 times in a year).

        • FOSS Is Fun@lemmy.mlEnglish
          1·
          1 year ago

          I’ve used Arch Linux and openSUSE Tumbleweed in the past and I have been using Linux for over 10 years …

          With each new version of an application there’s the change that configuration files or functionality changes. Packages might even get replaced with others.

          You would be surprised how much changes between Ubuntu LTS versions … My archived Ubuntu installation script had lots of if-statements for different versions of Ubuntu, since stuff got moved around. Such things can be as simple as gsettings schemas (keys might get renamed), but even these minor changes make documentation and therefore reproducable reinstallations troublesome.

          With a fixed release all these changes are nicely bundled in one large upgrade every couple of months/years, which makes it easy to document and to plan when to do the upgrade.

          • dino@discuss.tchncs.deEnglish
            1·
            1 year ago

            With each new version of an application there’s the change that configuration files or functionality changes. Packages might even get replaced with others.

            Even if this would be true, how would that impact your configuration? It doesn’t full-stop. If you want to access those new features you simply need to check how to activate them in your config file. Or are you making config edits in /etc/ ?!

            Your next paragraph I don’t understand, it seems specifically aimed at some kind of self “maintained” script, which as nothing to do with rolling release or distributions.

            • FOSS Is Fun@lemmy.mlEnglish
              1·
              1 year ago

              how would that impact your configuration?

              It impacts my documentation. If, for example, gsettings set org.gnome.software allow-update false no longer works, because they changed the key from allow-update to updates-allowed, then my documentation no longer works correctly. Same when new technology is introduced, e. g. a switch from Pulseaudio to Pipewire. With a rolling release distribution these changes can happen at any time, whereas with a fixed release these changes only occur when a new release of the distribution is made and I upgrade to it.

              I don’t have the time to continously track these changes and modify my documentation accordingly. Therefore I appreciate it if people bundle all those changes for me into one single distribution upgrade and write release notes with a changelog. Then I can spend a day reading the release notes, adjust the documentation, apply the upgrade on all devices and then move on for the next couple of months/years.

              which as nothing to do with rolling release or distributions.

              I tried to explain to you why I dislike rolling release distributions. That’s why I tried to give you one example where a fixed release distribution is more suitable in my opinion.

              I understand that these things might not matter to you, if you only have one computer (or so) to maintain at home or maintaining home computers is your hobby. But I have four personal computers and multiple devices from the family to maintain and system administration is no longer my hobby …

              • dino@discuss.tchncs.deEnglish
                1·
                1 year ago

                But I have four personal computers and multiple devices from the family to maintain and system administration is no longer my hobby …

                but you are writing documentation for scripts?

                • FOSS Is Fun@lemmy.mlEnglish
                  1·
                  1 year ago

                  but you are writing documentation for scripts?

                  No, I document my installations with scripts, so that I am able to install multiple computers the same way.