I’ve started encountering a problem that I should use some assistance troubleshooting. I’ve got a Proxmox system that hosts, primarily, my Opnsense router. I’ve had this specific setup for about a year.

Recently, I’ve been experiencing sluggishness and noticed that the IO wait is through the roof. Rebooting the Opnsense VM, which normally only takes a few minutes is now taking upwards of 15-20. The entire time my IO wait sits between 50-80%.

The system has 1 disk in it that is formatted ZFS. I’ve checked dmesg, and the syslog for indications of disk errors (this feels like a failing disk) and found none. I also checked the smart statistics and they all “PASSED”.

Any pointers would be appreciated.

Example of my most recent host reboot.

Edit: I believe I’ve found the root cause of the change in performance and it was a bit of shooting myself in the foot. I’ve been experimenting with different tools for log collection and the most recent one is a SIEM tool called Wazuh. I didn’t realize that upon reboot it runs an integrity check that generates a ton of disk I/O. So when I rebooted this proxmox server, that integrity check was running on proxmox, my pihole, and (I think) opnsense concurrently. All against a single consumer grade HDD.

Thanks to everyone who responded. I really appreciate all the performance tuning guidance. I’ve also made the following changes:

  1. Added a 2nd drive (I have several of these lying around, don’t ask) converting the zfs pool into a mirror. This gives me both redundancy and should improve read performance.
  2. Configured a 2nd storage target on the same zpool with compression enabled and a 64k block size in proxmox. I then migrated the 2 VMs to that storage.
  3. Since I’m collecting logs in Wazuh I set Opnsense to use ram disks for /tmp and /var/log.

Rebooted Opensense and it was back up in 1:42 min.

  • 𝓢𝓮𝓮𝓙𝓪𝔂𝓔𝓶𝓶OPEnglish
    1·
    2 months ago

    I’m trying to think of anything I may have changed since the last time I rebooted the opnsense VM. But I try to keep up on updates and end up rebooting pretty regularly. The only things on this system are the opnsense VM and a small pihole VM. At the time of the screenshot above, the opnsense VM was the only thing running.

    If it’s not a failing HDD, my next step is to try and dig into what’s generating the I/O to see if there’s something misbehaving.

    • Scrubbles@poptalk.scrubbles.techEnglish
      2·
      2 months ago

      I had bad luck with ZFS on proxmox because of all of the overhead, I found with my tiny cluster it was better to do good old ext4 and then just do regular backups. ZFS actually killed quite a few of my drives because of it’s heavyweight. Not saying that’s your problem, but I wouldn’t be surprised if it was